Here are the steps for completing the physical installation.
First, make sure to have the necessary tools ready. This will help us guide you in finding the ideal location for mounting the camera. The checklist below provides an overview of the key factors to keep in mind:
- Mount the camera 6-20 feet above the ground.
- Position it 9-45 feet from the edge of the pool.
- Minimize any obstructions in the camera’s view.
- North-to-south positioning is ideal to avoid sun glare.
- A steeper angle is better than a flat angle for optimal coverage.

START
Plug your camera into power using either a power adapter or PoE (Power-over-Ethernet) and bring it outside along with your tools.
Note: Make sure the cable can reach your desired mounting location.

Once the camera is plugged in, the app will guide you through a few screens showing tips and guidelines for installation. Cycle through these, and when you're ready, select Next.


FINISH
After choosing your mounting point, briefly disconnect the camera from power, mount the bracket, and slide the camera into place. Once the camera is securely seated, reconnect the power cable and click Finish in the app.

Once this process is complete, you'll be able to see the camera’s live view on the Home page.
